济南常铭数控设备有限公司
联系人:孙经理
联系电话:18763981956
邮箱:sunchangming-1@126.com
地址:山东省济南市长清区张夏街道办事处张王路西口路南100米厂房
网址:www.jncmcnc.com
产品特点:
1、开式 C 形结构,切角模为直角双刃口,回转式多方位切角模,只需要调整回转模架即可,切不同角度的角钢,角钢不需要转动,因此切角作业占地面积小,切角误差小。
2、本机还可以根据客户需要增加打号、冲孔、折弯及剪切功能,通过交换模具即可进行打号或冲孔作业。
产品用途:
主要用于角钢切角,也可配上模具冲孔,打号,折弯,剪切一机多用。
产品参数 :
型号 Model | QJ140 | QJ160 | QJ180 |
机器功能 Functions | 用于铁塔生产中角钢的切角,更换模具即可打号、冲孔 Used for hotching of angles in steel tower industry ,and also used for marking & punching if replace mould. | ||
公称压力(kN) Nominal pressure | 500 | 600 | 700 |
油缸行程(mm) Stroke of oil cylinder | 50 | 50 | 50 |
行程次数(times/min) Times of stroke | 20~25 | 20~25 | 20~25 |
电机功率(kW) Power of motor | 15 | 15 | 15 |
可切角钢范围(mm) Scope of angles | L40×40×3~140×140×12 | L40×40×3~160×160×16 | L40×40×3~180×180×20 |
切角模回转角度 Rotary die corner angle | ±45°手动 manual | ||
切角模外形尺寸(mm) Dimensions of notching mould | 650×650×500 | 700×700×500 | 830×700×600 |
外形尺寸(mm) Overall dimension(L×W×H) | 1270×1020×1800 | 1300×1020×1880 | 2260×1120×1900 |
注:上述参数如有变更,恕不另行通知。Remark:We reserve the right to make alterations without notice.
上一条: BJ 系列数控液压冲孔机
下一条: 焊接工程